How to Properly Mount a TV

A TV wall mount can save space by eliminating the need for a stand or media cabinet. It also creates a more aesthetically pleasing look in any room or home.

TV Mounting

However, improper installation could result in unsightly holes and a dangerous falling TV. Hiring a professional for your TV Mounting project is important.

A TV mount is one of the best ways to improve the viewing angle of your flat-screen television. It can also allow you to locate the TV above other furniture or in a room with more natural lighting. However, TV mounting is a job that requires careful planning to ensure the proper outcome. An incorrectly mounted TV can be a safety hazard and even worse, leave you with useless holes in your wall. To avoid these problems, follow a few basic guidelines to help you mount your television correctly.

Choose the location for your TV mount first. It is important to find a spot that will not block the television and be easy to access for power and cable connections. You may need to move furniture or components around to make the space work, but determining the ideal location for your TV mount will save time and energy in the long run.

The next step is to determine the desired height for the TV. For an optimal viewing experience, you will want the middle of the TV to be at eye level from where you will be sitting in the room. This is usually about 42 inches from the floor. Once you know the desired height, mark where you will be drilling your holes. A stud finder will be helpful in this process as it will pinpoint the locations of drywall studs on the wall. If you do not have a stud finder, knock on the wall to check for a hollow sound. Studs are typically spaced 16 inches apart, but some walls have studs that are closer together.

Once you have the stud locations marked, it is time to prepare your power drill and other tools. Make sure the battery is charged and your drill bit is ready for use. It is a good idea to have a small shop vacuum nearby as drilling into brick creates a lot of dust.

Once the “TV” half of the mount is attached to the rear of your TV, have a friend help you lift and position it on the wall. Use a level to ensure that the mount is straight. After positioning the TV on the wall, attach the remaining bracket pieces to the wall with a screwdriver and double-check that it is straight.

Type of TV

A TV mount helps keep the screen safe from accidents like spills or kids grabbing the set. It also makes it easier to clean the screen. When you mount a TV, consider the type of TV you own to make sure your mounting solution is compatible.

For example, if you have a flat mount and an older tube-style TV, a newer plasma or LCD may not fit correctly. The best way to determine compatibility is to visit a store that sells both types of TVs and ask an employee to help you find a solution.

Another consideration is how high you want to mount the TV. Many people mount the TV way too high, which is hard on their necks and can cause eyestrain. The ideal eye-level height is about 20 inches above the floor. To figure this out, remove the stand from the TV and measure the distance from the bottom edge of the frame to the top of the screen. Multiply the measurement by 2. Then add the height of any features on the wall, such as a fireplace or cabinets, to find the final height you want to mount the TV at.

Once you’ve decided where to mount the TV, it’s time to select a wall-mounting system. Most wall mounts come with a template that indicates the size and location of the holes you need to drill. The templates are designed to be centered on the centers of the studs in the wall, so this will dictate where you can mount the bracket if it isn’t flush with the wall.

Some mounts are fixed, while others are able to swivel or tilt. This allows you to angle the TV in different ways, which is useful if you have multiple seating options in a room. Some mounts even have a full-motion option, which lets you extend or move the TV in any direction.

Some mounts also include a cable concealer, which is a box that can hold all your cables and cords. This is particularly handy if you’re mounting the TV over an electrical outlet or fireplace, since it can prevent cords from becoming tangled.

Ports

When choosing a wall mount, make sure it’s compatible with the ports on your TV. Some mounts offer a variety of port configurations, which makes it easy to add and remove devices, such as Blu Ray players, gaming consoles or soundbars, and switch between different inputs for best results. Some also have covers that can camouflage wires or organize them in cord caddies. This can help reduce the clutter on the back of your TV, which can lead to tripping and injuries.

When installing your TV, make sure it’s at a comfortable viewing distance from the sofa. The Society of Motion Picture & Television Engineers recommends that the screen should fill 30 to 40 inches of your field of vision when you are sitting down to watch it. This will create a cinematic experience and protect your eyes from neck strain.

Before you begin mounting your TV, prepare a clean workspace by removing all furniture and decor from the area where you want to hang it. You should also cover any furniture or decor with painter’s tape to prevent accidental damage. Then, use your stud finder to locate studs in the wall where you want to drill holes for the mount. If you aren’t able to find a stud, try drilling into drywall at least 16 inches from the edge of the wall. This will give the mount the most stability.

If there aren’t any studs in the wall where you want the mount, use hollow wall anchors instead of screws to secure it to the drywall. This will make the mount less likely to rip off the wall and damage the drywall. If you’re using a full-motion or articulating mount, use wall anchors that are specially designed for these types of installations. They will hold more weight and can handle the movement of the bracket arm. For added safety, use a level to check that the mount is flat on the wall before screwing it in. If it’s not, you may need to reposition it or move it to another location.

Safety

Mounting a TV to the wall is a great way to free up space on furniture, and it can also add a nice aesthetic to your room. However, there are some things to keep in mind before you take the plunge. In particular, proper mounting is essential to avoid causing harm or damage to the TV.

To start, you should determine where on the wall you want to mount your TV. You can use a tape measure to get an idea of how high you want the TV to be. Then, mark the area with a pencil or other marking device. Next, you’ll need to find the studs in the wall. A stud finder is the easiest tool for this, but you can also tap on the wall with your hand or a hard object. If you hear a hollow sound, there is no stud in that spot.

You should then choose a stud-rated mount for your wall, and make sure the mount has the weight rating to support your TV. You should also check the packaging to ensure the mount has all of the necessary pieces for your project. Finally, make sure you have a carbide-tipped masonry bit for drilling the pilot holes in the drywall that your mounting screws will go into. You will also need a phillips head drill bit to drive the mounting screws into place. It’s also a good idea to have a standalone level, as the levels included with many mounts are not very accurate.

After you have all of the needed materials, it’s time to start the actual installation. First, remove the TV stand if it’s still attached to your TV. Then, set up the mount on the wall and use a level to make sure it’s straight. Once you’re confident that the mount is level, you can drill the holes for the mounting screws and begin attaching it to the wall.

While mounting a TV on the wall can be an easy DIY project, it’s always best to leave this type of work to professionals with experience. They can ensure that the job is done correctly and safely. This can help prevent the TV from falling or causing other problems, which is especially important in areas with heavy vibrations, such as near construction sites or railway tracks.