How to Go About Kitchen Remodeling
Whether you want to replace cabinet doors, add an island, or upgrade appliances, a kitchen remodel can make your dreams a reality. However, it is important to consider your family’s needs and budget before starting the project. Keep in mind that kitchen remodeling will create a disruption to your home for weeks or even months.
Before renovation can begin, the existing materials must be removed. The demolition phase is vital to kitchen remodeling and includes eliminating cabinets and removing flooring. It also allows your contractor to assess structural and utility elements that must be addressed. Contact Kitchen Remodeling In Richmond Va now!
This is an excellent opportunity to find and correct any problems that went unnoticed during the initial inspections. For example, water damage or pest infestations can be fixed during this phase, saving you the expense of repairing them later in the project. Demolition lets your contractor determine the feasibility of relocating plumbing or electrical outlets. This step is particularly important if you are making changes to your kitchen layout, such as adding an island or moving electrical outlets.
During this phase, the demolition crew will remove countertops by unscrewing them from the walls and each other, then scraping the tops and removing them. They will also remove the doors from the cabinet boxes and pull them out. Next, they will detach the caulking around the cabinets and remove them, as well as the screws holding them to the wall. They will then pull out the cabinets, starting with the base units and working to the upper cabinets.
Once the demolition is complete, the rough-in process begins. This involves hanging, taping, and finishing drywall with your remodel plans. It is also an excellent time to install any new electrical or plumbing fixtures you’ve chosen for your kitchen. The last steps in this phase involve installing the new cabinetry, appliances, flooring, paint colors, and other decorative touches you’ve been dreaming of for your kitchen.
If you’re planning a kitchen remodel, there’s much to consider. From tearing out your existing cabinets and appliances to finding a design that suits you, it can seem daunting to the average homeowner. The good news is that the process can begin once you’ve gotten the go-ahead from your local building inspector. Before you start swinging sledgehammers, it’s important to ensure that your space is prepared for the work ahead. This means you’ll want to plan for your future cooking area, including a temporary location where you can prepare meals during construction.
Rough-in is used in home construction to describe the early stages of installing plumbing and electrical wiring. The large waste pipes and water supply lines are installed during this time, but the fixtures are not. This allows the remodeling professionals to check that the plumbing is properly connected and works as intended. It also ensures that the right amount of space is available for adding fixtures and appliances.
While the rough-in phase of your kitchen remodel may not be as exciting as the initial demolition, it is a crucial step in the overall process. It can take a couple of days to a week or more, depending on the size of your home and the complexity of the plumbing installation.
The plumbing professional will also use this time to reroute any existing pipes if necessary. This is especially common when a kitchen remodel calls for the sink, refrigerator, or dishwasher to be moved from their current locations. This requires that the plumber reroute the water and drain lines to accommodate the new layout.
Most full-scale kitchen remodeling projects require significant construction tasks such as breaking down walls or adding new ones. GCs who manage these jobs usually hire licensed and professional plumbers, electricians, and HVAC workers to complete the rough-in work.
However, homeowners willing and able to do the hands-on work may save considerably by serving as their general contractor. The main drawback is that the homeowner takes more time and effort to do the work themselves, but the savings can be substantial.
Before installing cabinets, it’s a good idea to lay out where the upper and lower cabinet runs will end in the room, especially if you plan on having them run to the ceiling. This helps ensure that the cabinet runs line up and parallel when installed. Start by locating the wall studs using a stud finder, then mark where each cabinet line will end. It’s also a good idea to install electrical receptacles above the countertops every 4 feet and wall-mounted switches and light fixtures.
Once the layout is finalized, it’s a good idea to start with the base cabinets and work your way up since the upper cabinets can be hung on top of the base cabinets. As you work, keep a level in front of you and check for a “high spot,” which is an area where the floor isn’t flat compared to the adjacent wall. Identifying this before you install the first cabinet can save time and money regarding shimming. Once you’re happy with the positioning of each cabinet, drive 2-1/2-inch screws through the back into the wall studs.
The last step in kitchen remodeling involves the installation of new appliances. Whether your old ones need to be replaced or you’re upgrading to energy-efficient models, this is an exciting part of the process and can yield jaw-dropping results. Depending on the extent of your remodel, you may also need to install new flooring or replace existing countertops and sinks.
Unless you’re planning on doing the work yourself, it’s best to let a kitchen remodeler handle appliance installation. Not only can they ensure the proper installation of your new appliances, but they’ll also remove and properly dispose of the old units. They can also recommend the best brands of appliances for your needs and budget, as well as help you determine which kitchen layouts will work best in your space.
When choosing between kitchen remodeling and renovation, consider what features you’d like to change most and how that might impact your resale value. A remodel is a more comprehensive project involving knocking down walls, enlarging the kitchen footprint, and relocating plumbing. It requires a team of design and contracting professionals, and building permits may be required.
If your goal is to upgrade the look of your kitchen, a renovation might be enough. Please make a list of your must-haves and then compare it to the list of your wish-list items. That way, you can be sure that your budget will cover the entire job without leaving any money on the table. To save even more on kitchen remodeling, consider working with a contractor specializing in kitchen remodels. You can find one in your area through Houzz by searching for “Kitchen Remodeling Specialist” and looking at photos of their past work.
Once the framing and mechanicals are complete, it’s time to hang the drywall. This may seem tedious, but it’s a huge milestone and an exciting part of the renovation process. This is also the time to install new insulation if necessary.
This step is important for minimizing energy costs and can often be done simultaneously with other kitchen remodeling tasks, such as installing lighting, electrical outlets, plumbing fixtures, and appliances. A professional contractor will typically use spray foam insulation, but some homeowners can do this on their own using fiberglass batt insulation.
After the drywall is installed and taped, it’s a good idea to prime everything before installing cabinets. This will help prevent chipping, staining, and other issues later on.
It’s also a great opportunity to touch up any damaged paint while remodeling and add crown molding. Crown molding is the decorative lining placed along where a wall meets the ceiling. It’s unnecessary but can add a finishing touch to your kitchen.
This is a big decision, and many homeowners will wait until after cabinet installation to install the flooring. However, this is a debated topic; some will choose to do it simultaneously or on a project-by-project basis.
At this point, you’ll likely need to schedule a building inspection. This is important to ensure that the remodel follows local codes and regulations, especially for electrical, plumbing, and gas lines. Once the inspector gives you the go-ahead, you can move on to your kitchen remodel’s next and final phase: interior finishes. At this point, your dream kitchen will truly begin to take shape.